Description
Eureka Mignon Libra 65 AP Overview
The Eureka Mignon Libra 65 AP is an all-purpose, weight-based grinder with 65mm flat steel burrs and a redesigned grind adjustment knob that makes moving between coarse and fine sizes easy. It adds Eureka’s ACE anti-static system and silent-grind technology to the mix.
Its burr set is the headline change. At 65mm, they are larger than the 55mm burrs on the original Libra, and they are rear mounted for a more uniform grinding surface. The geometry also differs from the espresso-focused original, so performance carries across the full range of grind sizes, from espresso to cold brew. Weight-based dosing is described as a much more precise method than timing grind cycles, and it is the choice of many expert baristas and coffee enthusiasts around the world. The result is a convenient, accurate and relatively quiet grinder built to last.
Key Features
- 65mm flat steel burrs, rear mounted, with all-purpose geometry
- A larger adjustment knob numbered 0 to 20 rather than 0 to 9
- A rotation counter that ticks up as you go coarser and down as you go finer, helping you find a setting again after changing brew method
- Weight-based dosing, a more precise approach than timing grind cycles
- ACE anti-static system and Silent-Grind technology
- Built in Italy with commercial-grade components
Who It’s For
This grinder fits home users who want the convenience of weight-based dosing without limiting themselves to espresso. It is a good match for anyone who regularly alternates between brew methods and wants consistent results from fine to coarse.
Specifications
- Burrs: 65mm flat steel, rear mounted
- Dosing: Weight-based
- Grind knob: Numbered 0-20, with rotation counter
- Anti-static: ACE system
- Noise control: Silent-Grind technology
- Origin: Built in Italy
- Burr geometry: Updated to perform across the full range, from espresso to cold brew
- Efficiency features: ACE anti-static system and Silent-Grind technology
Frequently asked questions
What burrs does the Eureka Mignon Libra 65 AP use?
The Mignon Libra 65 AP uses 65mm flat steel burrs, rear mounted for a more uniform grinding surface. The listing says they are larger than the 55mm burrs on the original Libra, with geometry updated to perform across the full range from espresso to cold brew.
How does weight-based dosing work on the Mignon Libra AP?
The grinder doses by weight rather than by timing grind cycles. The listing describes weight-based dosing as a much more precise method than timed grinding, giving repeatable doses for anyone who already weighs coffee before brewing.
How is the grind knob marked?
The larger adjustment knob is numbered 0 to 20 rather than 0 to 9. A rotation counter ticks up as you go coarser and down as you go finer, which helps you find a setting again after changing brew method.
Is the Libra 65 AP quiet and low in static?
It includes Eureka’s ACE anti-static system and Silent-Grind technology. The listing calls the result a convenient, accurate and relatively quiet grinder, built in Italy with commercial-grade components, though it does not give a decibel figure.
Who is the Eureka Mignon Libra 65 AP for?
It fits home users who want weight-based dosing without limiting themselves to espresso. The listing names anyone who regularly alternates between brew methods and wants consistent results from fine to coarse as a good match.
Buying advice: read our guide to coffee grinders for pour over, or compare all pour over and drip grinders.
Reviews
There are no reviews yet.