Description
Dosko 200-6HC Mini Stump Grinder Overview
The Dosko 200-6HC is a compact, walk-behind mini stump grinder powered by a 196cc Honda GX200 engine. Light and foldable, it is meant to travel easily and to remove stumps where space is limited, which makes it a good fit for residential properties, narrow access points and jobs where portability matters.
A fold-over handlebar lets the grinder fit into vehicles with large rear openings, and its dry weight of 134 pounds keeps loading and maneuvering manageable. Cutting is handled by a 9-5/8 inch diameter, 3/8 inch thick cutter wheel fitted with four Greenteeth 500 Series teeth. These teeth use a concave dish-shaped edge that shears wood rather than shredding it, and each one can be rotated in three 120-degree steps to bring a fresh edge into play within minutes. It uses a Noram centrifugal clutch, carries a 4,700 RPM rating, and can work stumps up to 10 inches above grade and 9 inches below. A cyclone air cleaner shields the engine in dusty conditions, and an oil shutdown sensor stops operation if the oil level drops too low.
Key Features
- Honda GX200 engine (196cc) for consistent grinding power.
- Compact, lightweight frame with a fold-over handlebar for transport.
- Greenteeth 3-in-1 system using four 500 Series teeth that rotate in 120-degree increments.
- Cyclone air cleaner that helps extend engine life in dusty work.
- Oil shutdown sensor that protects the engine when oil runs low.
- 1-inch diameter bearings for smooth, durable operation.
- Side discharge frame for better chip flow and visibility.
Who It’s For
The 200-6HC is meant for homeowners and light commercial users who need to reach stumps through gates, side yards and other tight spots. Anyone who transports a grinder in a vehicle with a large rear opening will appreciate its fold-over handle and modest weight.
Specifications
| Brand | Dosko |
| Model | 200-6HC |
| Product Category | Stump Grinder |
| Engine Brand | Honda |
| Engine Model | GX200 |
| Displacement | 196cc |
| Fuel Type | Gasoline |
| Oil Alert | Yes |
| RPM | 4700 |
| Drive System | Noram Centrifugal Clutch |
| Bearings | 1 In. Diameter |
| Cutter Wheel | 9-5/8 In. Dia. x 3/8 In. Thick |
| Cutting Capacity | 10 In. Above Grade, 9 In. Below Grade |
| Teeth | Greenteeth® 500 Series Teeth (4) |
| Tires | 12.5 In., 410-350 x 6 In. Adjustable Brake Band |
| Dry Weight | 134 Lbs |
Frequently asked questions
What engine does the Dosko 6HP Mini Stump Grinder use?
The Dosko 200-6HC is powered by a 196cc Honda GX200 gasoline engine. Power goes through a Noram centrifugal clutch, and the machine carries a 4,700 RPM rating. A cyclone air cleaner shields the engine in dusty conditions, and an oil shutdown sensor stops operation if the oil level drops too low.
Will the Dosko 6HP mini grinder fit in a vehicle and through narrow gates?
It is built for portability. A fold-over handlebar lets it fit into vehicles with large rear openings, and its dry weight of 134 pounds keeps loading and maneuvering manageable. The listing describes it as suited to gates, side yards and other narrow access points.
How large a stump can the Dosko 200-6HC handle?
Cutting capacity is listed as 10 inches above grade and 9 inches below grade. The cutter wheel is 9-5/8 inches in diameter and 3/8 inch thick, running on 1-inch diameter bearings, with a side discharge frame for chip flow and visibility.
What teeth are on the 200-6HC cutter wheel?
The wheel is fitted with four Greenteeth 500 Series teeth. Their concave dish-shaped edge shears wood rather than shredding it, and each tooth can be rotated in three 120-degree steps to bring a fresh edge into play within minutes.
Who is the Dosko 200-6HC meant for?
The listing aims it at homeowners and light commercial users who need to reach stumps through gates, side yards and other tight spots on residential properties, and at anyone who carries a grinder in a vehicle with a large rear opening.
Buying advice: read our guide to how to use a stump grinder, or browse all stump grinders.
Reviews
There are no reviews yet.