Description
Fellow Ode Brew Grinder Gen 2 Overview
The Fellow Ode Brew Grinder Gen 2 keeps the appeal of the original while adding updated Gen 2 Brew Burrs that can grind finer, starting at 250 microns. It retains the Smart Speed PID motor, which holds a steady 1,400 RPM for low static and even particle distribution.
The key change is the 64mm flat steel brew burr set. Its two-stage grinding geometry reaches finer sizes, which raises extraction yield when hand brewing very light roasts. It is a single dose design with low retention, aimed at people who brew by hand. The burrs are still large for a grinder of this size, and the PID motor applies the same grinding force to every bean, supporting grind quality and particle distribution. The Gen 2 keeps what made the original appealing: premium construction, intuitive operation and a low retention single dose design.
Key Features
- 64mm flat steel brew burrs with two-stage grinding geometry
- Smart Speed PID motor holds 1,400 RPM so the same grinding force is applied to each bean
- 31 grind settings on a large front dial, covering Cold Brew, French Press, Drip, Pour Over and Prismo
- A larger load chute that takes a 100 gram dose
- Grinds at about 60 dB, comparable to a normal conversation
- Single dose, low retention design
Who It’s For
Hand brew fans who want to dial in light roasted coffee will find the Gen 2 a thoughtful fit. It suits single dose users who prefer drip, pour over, French press or cold brew rather than espresso.
Specifications
- Burrs: 64mm flat steel Gen 2 brew burrs
- Motor: Smart Speed PID, 1,400 RPM
- Grind settings: 31
- Finest grind: From 250 microns
- Load chute: 100 gram dose
- Noise: About 60 dB
- Dial: Large front dial with Cold Brew, French Press, Drip, Pour Over and Prismo ranges
- Design: Single dose, low retention
Frequently asked questions
What is different about the Fellow Ode Gen 2?
The Gen 2 adds updated Gen 2 Brew Burrs that grind finer, starting at 250 microns. The two-stage grinding geometry of the 64mm flat steel burrs raises extraction yield when hand brewing very light roasts, while the Smart Speed PID motor and single dose design carry over from the original.
Can the Ode Gen 2 grind for espresso?
No. It is a brew grinder aimed at drip, pour over, French press and cold brew rather than espresso. The large front dial covers Cold Brew, French Press, Drip, Pour Over and Prismo ranges, with the finest setting at 250 microns.
What burrs and motor does the Ode Gen 2 use?
It uses 64mm flat steel Gen 2 brew burrs and a Smart Speed PID motor that holds a steady 1,400 RPM, applying the same grinding force to every bean for low static and even particle distribution.
How many grind settings does the Gen 2 have?
There are 31 grind settings on the large front dial, with marked ranges for Cold Brew, French Press, Drip, Pour Over and Prismo. Because the Gen 2 burrs reach 250 microns, the finer end of the dial is useful for dialing in light roasts.
How loud is the Ode Gen 2?
It grinds at about 60 dB, which Fellow compares to a normal conversation. The Smart Speed PID motor holds a steady 1,400 RPM, which Fellow credits for low static and even particle distribution while it grinds a single dose.
How much coffee does the Ode Gen 2 take per dose?
The larger load chute takes a 100 gram dose. It is a single dose, low retention design, meant for people who weigh out beans for each brew rather than storing them in a hopper.
Buying advice: read our guide to coffee grinders for pour over, or compare all pour over and drip grinders.
Reviews
There are no reviews yet.